User Manual
Table Of Contents
- 1 Cyber security disclaimer
- 2 Preconditions of this document
- 3 System overview
- 4 Desigo workflow, tools and programming
- 4.1 Coverage of the technical process
- 4.2 Coverage of the system
- 4.3 Main tasks
- 4.4 Tools for different roles
- 4.5 Working with libraries
- 4.6 Working in parallel and subcontracting
- 4.7 Workflow for primary systems
- 4.8 Workflow for room automation classic
- 4.9 Workflow for Desigo room automation
- 4.10 Desigo Configuration Module (DCM)
- 4.11 Desigo Xworks Plus (XWP)
- 4.12 Desigo Automation Building Tool (ABT)
- 4.13 Programming in D-MAP
- 5 Control concept
- 6 Technical view
- 7 Global objects and functions
- 8 Events and COV reporting
- 9 Alarm management
- 9.1 Alarm sources
- 9.2 Alarm example
- 9.3 Effects of BACnet properties on alarm response
- 9.4 Alarm response of the function blocks
- 9.5 Alarm functions
- 9.6 Alarm management by notification class
- 9.7 Alarm routing over the network
- 9.8 Alarm queuing
- 9.9 Common alarms
- 9.10 Alarm suppression
- 9.11 Alarm message texts
- 10 Calendars and schedulers
- 11 Trending
- 12 Reports
- 13 Data storage
- 14 Network architecture
- 15 Remote access
- 16 Management platform
- 17 Desigo Control Point
- 18 Automation stations
- 19 Logical I/O blocks
- 20 Room automation
- 21 Desigo Open
- 22 System configuration
- 22.1 Technical limits and limit values
- 22.2 Maximum number of elements in a network area
- 22.3 Desigo room automation system function group limits
- 22.4 Devices
- 22.4.1 PXC..D automation stations / system controllers
- 22.4.2 LonWorks system controllers
- 22.4.3 Automation stations with LonWorks integration
- 22.4.4 PX Open integration (PXC001.D/-E.D)
- 22.4.5 PX Open integration (PXC001.D/-E.D + PXA40-RS1)
- 22.4.6 PX Open integration (PXC001.D/-E.D + PXA40-RS2)
- 22.4.7 PX KNX integration (PXC001.D/-E.D)
- 22.4.8 TX Open integration (TXI1/2/2-S.OPEN)
- 22.4.9 Number of data points on Desigo room automation stations
- 22.4.10 Number of data points for PXC3
- 22.4.11 Number of data points for DXR1
- 22.4.12 Number of data points for DXR2
- 22.4.13 PXM20 operator unit
- 22.4.14 PXM10 operator unit
- 22.4.15 Desigo Control Point
- 22.4.16 PXG3.L and PXG3.M BACnet routers
- 22.4.17 SX OPC
- 22.4.18 Desigo CC
- 22.4.19 Desigo Insight
- 22.4.20 Desigo Xworks Plus (XWP)
- 22.4.21 Desigo Automation Building Tool (ABT)
- 22.5 Applications
- 23 Compatibility
- 23.1 Desigo version compatibility definition
- 23.2 Desigo system compatibility basics
- 23.2.1 Compatibility with BACnet standard
- 23.2.2 Compatibility with operating systems
- 23.2.3 Compatibility with SQL servers
- 23.2.4 Compatibility with Microsoft Office
- 23.2.5 Compatibility with web browsers
- 23.2.6 Compatibility with ABT Go
- 23.2.7 Compatibility with VMware (virtual infrastructure)
- 23.2.8 Compatibility of software/libraries on the same PC
- 23.2.9 Hardware and firmware compatibility
- 23.2.10 Backward compatibility
- 23.2.11 Engineering compatibility
- 23.2.12 Compatibility with Desigo Configuration Module (DCM)
- 23.2.13 Compatibility with Desigo PX / Desigo room automation
- 23.2.14 Compatibility with Desigo RX tool
- 23.2.15 Compatibility with TX-I/O
- 23.2.16 Compatibility with TX Open
- 23.3 Desigo Control Point
- 23.4 Upgrading from Desigo V6.2 Update (or Update 2) to V6.2 Update 3
- 23.5 Siemens WEoF clients
- 23.6 Migration compatibility
- 23.7 Hardware requirements of Desigo software products
- 24 Desigo PXC4 and PXC5
- 25 Compatibility of Desigo V6.2 Update 3 with PXC4 and PXC5
Compatibility of Desigo V6.2 Update 3 with PXC4 and PXC5
25
350 | 351 CM110664en_07
For more information, see
Application Guide for BACnet Networks in Building Automation
(A6V11159798).
Engineering and commissioning of Desigo PXC4 and PXC5
Engineer and commission the Desigo PXC4 and PXC5 subsystem with ABT site V4.0 and export/import it
into the Desigo CC management platform.
For more information on the system compatibility of the Desigo CC management platform, see
Desigo CC
System Description
(A6V10415500).
Engineering and commissioning of Desigo V6.2 Update 3
Engineer enhancements and adaptations in Desigo V6.2 Update 3 with XWP V6.2 (ABT Site) and
export/import it into the Desigo CC management platform.
For more information on the system compatibility of the Desigo CC management platform, see
Desigo CC
System Description
(A6V10415500).
Data exchange between Desigo V6.2 Update 3 and Desigo PXC4 and PXC5 on automation level
Similar to the integration of third-party systems via BACnet references into the Desigo V6.2 Update 3
system engineered via XWP V6.2.
For more information, see
XWP Online Help
.
PXC3
DXR2
IP Subnet 192.168.103.x VLAN ID3
Desigo PX
BACnet/IP UDP Port: BAC0
BBMD
IP Subnet 192.168.102.x VLAN ID2
CC Client CC Server
System-wide Scope
Foreign Device
IP Subnet 192.168.104.x VLAN ID4
PXC3 DXR2
PXC3
DXR2
BACnet/IP UDP Port: BAC0
PXG3/PX
BBMD
IP Subnet
PXC3
DXR2
PXC3
DXR2
BACnet/IP UDP Port: BAC0
PXG3/PX
BBMD
IP Subnet
IP Subnet
IP Subnet 192.168.106.x VLAN ID6
Desigo PX00..200..D
Desigo PX00..200..D
BACnet/IP UDP Port: BAC0
BBMD
Desigo PX00..200..D
Building A
BACnet Internetwork 1 (BAC0)
BACnet Communication Path
Building Scope: Central Functions
Floor Scope: Flexible Rooms
Floor Scope: Flexible Rooms
Plant Scope: Primary Plants with Desigo PX00..200..D
Desigo CC Desigo CC
IP Subnet 192.168.105.x VLAN ID5
IP-Subnetz 192.168.100.x
IP Subnet
IP Subnet 192.168.107.x VLAN ID7
PXC4.E16
PXC4.E16
BACnet/IP UDP Port: BAC0
BBMD
PXC5.E003
Plant Scope: Primary Plants with Desigo PXC4 & 5