User Manual
Table Of Contents
- 1 Cyber security disclaimer
- 2 Preconditions of this document
- 3 System overview
- 4 Desigo workflow, tools and programming
- 4.1 Coverage of the technical process
- 4.2 Coverage of the system
- 4.3 Main tasks
- 4.4 Tools for different roles
- 4.5 Working with libraries
- 4.6 Working in parallel and subcontracting
- 4.7 Workflow for primary systems
- 4.8 Workflow for room automation classic
- 4.9 Workflow for Desigo room automation
- 4.10 Desigo Configuration Module (DCM)
- 4.11 Desigo Xworks Plus (XWP)
- 4.12 Desigo Automation Building Tool (ABT)
- 4.13 Programming in D-MAP
- 5 Control concept
- 6 Technical view
- 7 Global objects and functions
- 8 Events and COV reporting
- 9 Alarm management
- 9.1 Alarm sources
- 9.2 Alarm example
- 9.3 Effects of BACnet properties on alarm response
- 9.4 Alarm response of the function blocks
- 9.5 Alarm functions
- 9.6 Alarm management by notification class
- 9.7 Alarm routing over the network
- 9.8 Alarm queuing
- 9.9 Common alarms
- 9.10 Alarm suppression
- 9.11 Alarm message texts
- 10 Calendars and schedulers
- 11 Trending
- 12 Reports
- 13 Data storage
- 14 Network architecture
- 15 Remote access
- 16 Management platform
- 17 Desigo Control Point
- 18 Automation stations
- 19 Logical I/O blocks
- 20 Room automation
- 21 Desigo Open
- 22 System configuration
- 22.1 Technical limits and limit values
- 22.2 Maximum number of elements in a network area
- 22.3 Desigo room automation system function group limits
- 22.4 Devices
- 22.4.1 PXC..D automation stations / system controllers
- 22.4.2 LonWorks system controllers
- 22.4.3 Automation stations with LonWorks integration
- 22.4.4 PX Open integration (PXC001.D/-E.D)
- 22.4.5 PX Open integration (PXC001.D/-E.D + PXA40-RS1)
- 22.4.6 PX Open integration (PXC001.D/-E.D + PXA40-RS2)
- 22.4.7 PX KNX integration (PXC001.D/-E.D)
- 22.4.8 TX Open integration (TXI1/2/2-S.OPEN)
- 22.4.9 Number of data points on Desigo room automation stations
- 22.4.10 Number of data points for PXC3
- 22.4.11 Number of data points for DXR1
- 22.4.12 Number of data points for DXR2
- 22.4.13 PXM20 operator unit
- 22.4.14 PXM10 operator unit
- 22.4.15 Desigo Control Point
- 22.4.16 PXG3.L and PXG3.M BACnet routers
- 22.4.17 SX OPC
- 22.4.18 Desigo CC
- 22.4.19 Desigo Insight
- 22.4.20 Desigo Xworks Plus (XWP)
- 22.4.21 Desigo Automation Building Tool (ABT)
- 22.5 Applications
- 23 Compatibility
- 23.1 Desigo version compatibility definition
- 23.2 Desigo system compatibility basics
- 23.2.1 Compatibility with BACnet standard
- 23.2.2 Compatibility with operating systems
- 23.2.3 Compatibility with SQL servers
- 23.2.4 Compatibility with Microsoft Office
- 23.2.5 Compatibility with web browsers
- 23.2.6 Compatibility with ABT Go
- 23.2.7 Compatibility with VMware (virtual infrastructure)
- 23.2.8 Compatibility of software/libraries on the same PC
- 23.2.9 Hardware and firmware compatibility
- 23.2.10 Backward compatibility
- 23.2.11 Engineering compatibility
- 23.2.12 Compatibility with Desigo Configuration Module (DCM)
- 23.2.13 Compatibility with Desigo PX / Desigo room automation
- 23.2.14 Compatibility with Desigo RX tool
- 23.2.15 Compatibility with TX-I/O
- 23.2.16 Compatibility with TX Open
- 23.3 Desigo Control Point
- 23.4 Upgrading from Desigo V6.2 Update (or Update 2) to V6.2 Update 3
- 23.5 Siemens WEoF clients
- 23.6 Migration compatibility
- 23.7 Hardware requirements of Desigo software products
- 24 Desigo PXC4 and PXC5
- 25 Compatibility of Desigo V6.2 Update 3 with PXC4 and PXC5
System configuration
Maximum number of elements in a network area
22
CM110664en_07 315 | 351
This limit type… …is shown like this Example
Technical limit verified Limit* 60*
Technical limit NOT verified [Limit*] [50*]
Recommended limit verified Limit 64
Recomended limit NOT verified [Limit] [1'000]
Limit subject to proviso (refer to footnotes) (Limit) (10)
9
22.2 Maximum number of elements in a network area
Number of elements / Per
network area
Desigo
system
BACnet
inter-
network
BACnet
PTP
inter-
network
BACnet/
IP
network
BACnet
MS/TP
network
BACnet/
LonTalk
network
LonWork
s trunk
(FLN)
PX KNX
inte-
gration
PX site
Desigo topology
BACnet internetwork 200 n/a n/a n/a n/a n/a n/a n/a
BACnet PTP internetwork 1
18
n/a n/a n/a n/a n/a n/a n/a
BACnet/IP network n/a 10 [50*] [1]
19
n/a n/a n/a n/a [total 20]
BACnet MS/TP network n/a [50] n/a 8 n/a n/a n/a n/a
BACnet/LonTalk network [3] n/a n/a n/a n/a n/a n/a
PXG3.M/L (BACnet router) n/a [100] [30] [100] 1 1 n/a n/a n/a
IP segment n/a 10 [50*]
6
[50*]
6
10 [50*]
6
n/a n/a n/a n/a n/a
LonWorks segment (ALN) n/a [100] [30] n/a n/a 1 n/a n/a n/a
PX site [1,000] [30] 5 n/a n/a n/a n/a n/a n/a
PX plant [4,000] [2,000] [60] n/a n/a n/a n/a n/a 100
LonWorks trunk (FLN) [200] [100] [30] n/a n/a n/a n/a [50]
LonWorks segment (FLN) n/a n/a n/a n/a n/a n/a [5] n/a [250]
PX KNX integration [200] [100] [30] n/a n/a n/a n/a [50]
Desigo devices
PX… without DXR2/PXC3
15
[2,000] [1,000]
9
[30] [200]
8
n/a 30 n/a n/a 50/100
17
PXC3.E (Desigo room
automation)
(10,000)
16
[1,500]
(2,500)
n/a 250
23
[500]
24
n/a n/a n/a n/a n/a
15
DXR2
14
(Desigo room
automation)
(10,000)
16
[1,500]
(2,500)
n/a 250
23
[500]
24
64
21
n/a n/a n/a n/a
15
DXR1 (Desigo room
automation)
(10,000)
16
[1,500]
(2,500)
n/a 100
23
[500]
24
64
21
n/a n/a n/a n/a
15
Desigo CC 10 10 n/a 10 n/a n/a n/a n/a n/a
PXM20 n/a (10)
9
10 n/a n/a 10 n/a n/a total 15
10
PXM30/40/50.E n/a n/a n/a 10 n/a n/a n/a n/a n/a
PXG3.W100-1 n/a n/a n/a 10 n/a n/a n/a n/a n/a
PXG3.W200-1 n/a n/a n/a 10 n/a n/a n/a n/a n/a
Desigo Xworks Plus (XWP)
(commissioning)
12
n/a [10] [10] [10] n/a [5] n/a n/a total 15
10
Total LonWorks nodes [40,000] [20,000] [6,000] n/a n/a n/a 300
2
n/a [10,000]
RXB [8,000] [2,000] [1,200] n/a n/a n/a n/a 45
4
[2,000]