User Manual
Table Of Contents
- 1 Cyber security disclaimer
- 2 Preconditions of this document
- 3 System overview
- 4 Desigo workflow, tools and programming
- 4.1 Coverage of the technical process
- 4.2 Coverage of the system
- 4.3 Main tasks
- 4.4 Tools for different roles
- 4.5 Working with libraries
- 4.6 Working in parallel and subcontracting
- 4.7 Workflow for primary systems
- 4.8 Workflow for room automation classic
- 4.9 Workflow for Desigo room automation
- 4.10 Desigo Configuration Module (DCM)
- 4.11 Desigo Xworks Plus (XWP)
- 4.12 Desigo Automation Building Tool (ABT)
- 4.13 Programming in D-MAP
- 5 Control concept
- 6 Technical view
- 7 Global objects and functions
- 8 Events and COV reporting
- 9 Alarm management
- 9.1 Alarm sources
- 9.2 Alarm example
- 9.3 Effects of BACnet properties on alarm response
- 9.4 Alarm response of the function blocks
- 9.5 Alarm functions
- 9.6 Alarm management by notification class
- 9.7 Alarm routing over the network
- 9.8 Alarm queuing
- 9.9 Common alarms
- 9.10 Alarm suppression
- 9.11 Alarm message texts
- 10 Calendars and schedulers
- 11 Trending
- 12 Reports
- 13 Data storage
- 14 Network architecture
- 15 Remote access
- 16 Management platform
- 17 Desigo Control Point
- 18 Automation stations
- 19 Logical I/O blocks
- 20 Room automation
- 21 Desigo Open
- 22 System configuration
- 22.1 Technical limits and limit values
- 22.2 Maximum number of elements in a network area
- 22.3 Desigo room automation system function group limits
- 22.4 Devices
- 22.4.1 PXC..D automation stations / system controllers
- 22.4.2 LonWorks system controllers
- 22.4.3 Automation stations with LonWorks integration
- 22.4.4 PX Open integration (PXC001.D/-E.D)
- 22.4.5 PX Open integration (PXC001.D/-E.D + PXA40-RS1)
- 22.4.6 PX Open integration (PXC001.D/-E.D + PXA40-RS2)
- 22.4.7 PX KNX integration (PXC001.D/-E.D)
- 22.4.8 TX Open integration (TXI1/2/2-S.OPEN)
- 22.4.9 Number of data points on Desigo room automation stations
- 22.4.10 Number of data points for PXC3
- 22.4.11 Number of data points for DXR1
- 22.4.12 Number of data points for DXR2
- 22.4.13 PXM20 operator unit
- 22.4.14 PXM10 operator unit
- 22.4.15 Desigo Control Point
- 22.4.16 PXG3.L and PXG3.M BACnet routers
- 22.4.17 SX OPC
- 22.4.18 Desigo CC
- 22.4.19 Desigo Insight
- 22.4.20 Desigo Xworks Plus (XWP)
- 22.4.21 Desigo Automation Building Tool (ABT)
- 22.5 Applications
- 23 Compatibility
- 23.1 Desigo version compatibility definition
- 23.2 Desigo system compatibility basics
- 23.2.1 Compatibility with BACnet standard
- 23.2.2 Compatibility with operating systems
- 23.2.3 Compatibility with SQL servers
- 23.2.4 Compatibility with Microsoft Office
- 23.2.5 Compatibility with web browsers
- 23.2.6 Compatibility with ABT Go
- 23.2.7 Compatibility with VMware (virtual infrastructure)
- 23.2.8 Compatibility of software/libraries on the same PC
- 23.2.9 Hardware and firmware compatibility
- 23.2.10 Backward compatibility
- 23.2.11 Engineering compatibility
- 23.2.12 Compatibility with Desigo Configuration Module (DCM)
- 23.2.13 Compatibility with Desigo PX / Desigo room automation
- 23.2.14 Compatibility with Desigo RX tool
- 23.2.15 Compatibility with TX-I/O
- 23.2.16 Compatibility with TX Open
- 23.3 Desigo Control Point
- 23.4 Upgrading from Desigo V6.2 Update (or Update 2) to V6.2 Update 3
- 23.5 Siemens WEoF clients
- 23.6 Migration compatibility
- 23.7 Hardware requirements of Desigo software products
- 24 Desigo PXC4 and PXC5
- 25 Compatibility of Desigo V6.2 Update 3 with PXC4 and PXC5
Logical I/O blocks
Slope [Slpe] and Intercept [Icpt]
19
CM110664en_07 275 | 351
Siemens Building Technologies field devices: XWP automatically enters the combined values [Slpe] and
[Icpt] (for the signal type, the field device and its measurement or positioning range) on the I/O block.
Third-party field devices: You can calculate the value [Slpe] and [Icpt] using the Intercept Calculator.
[Slpe] and [Icpt] Analog Input
TX- and PT-I/O modules PX modular
In the Desigo PX modular automation stations, the analog input block is used with the following TX-I/O and
PT-I/O modules:
Signal type
measurement
Description Standard
measuring range
Resolution on the
bus
Value range on
the bus
[Slpe] [Icpt]
R1K LG-Ni 1000 -50 … 150 °C 1/100 °C -5000 ... 15000 0.01 0
P100 Pt100 0 … 250 Ohm 1/100 Ohm 0 ... 25000 0.01 0
R250 Resistance 0 … 250 Ohm 1/100 Ohm 0 ... 25000 0.01 0
Pt100_4 Pt100 -50 ... 600 °C 1/100 °C -5000 ... 40000 0.01 0
P1K Pt1000 0 … 2 500 Ohm 1/10 Ohm 0 ... 25000 0.1 0
R2K5 Resistance 0 … 2 500 Ohm 1/10 Ohm 0 ... 25000 0.1 0
T1 PTC sensor -50 ... 150 °C 1/100 °C -5000 ... 15000 0.01 0
Ni1K LG-Ni 1000 -50 ... 180 °C 1/100 °C -5000 ... 18000 0.01 0
Pt1K375 Pt1000 (NA) -50 ... 180 °C 1/100 °C -5000 ... 18000 0.01 0
Pt1K385 Pt1000 (EU) -50 ... 600°C 1/100 °C -5000 ... 60000 0.01 0
NTC10K NTC sensor -40 ... 115 °C 1/100 °C -5000 ... 11500 0.01 0
NTC100K NTC sensor -40 ... 125 °C 1/100 °C -5000 ... 12500 0.01 0
U10 DC 0 ... 10V 0 … 10 Volt 1/1000 V 0 ... . 10000 0.001 0
I420 DC 4 ... 20mA 4 … 20 mA 1/1000 mA 4000 ... 20000 0.001 0
I25/020 (Shunt 200
Ohm)
DC 0 ... 25mA 1 … 5 mA 1/1000 V 0 ... 5000 0.001 0