User Manual
Table Of Contents
- 1 Cyber security disclaimer
- 2 Preconditions of this document
- 3 System overview
- 4 Desigo workflow, tools and programming
- 4.1 Coverage of the technical process
- 4.2 Coverage of the system
- 4.3 Main tasks
- 4.4 Tools for different roles
- 4.5 Working with libraries
- 4.6 Working in parallel and subcontracting
- 4.7 Workflow for primary systems
- 4.8 Workflow for room automation classic
- 4.9 Workflow for Desigo room automation
- 4.10 Desigo Configuration Module (DCM)
- 4.11 Desigo Xworks Plus (XWP)
- 4.12 Desigo Automation Building Tool (ABT)
- 4.13 Programming in D-MAP
- 5 Control concept
- 6 Technical view
- 7 Global objects and functions
- 8 Events and COV reporting
- 9 Alarm management
- 9.1 Alarm sources
- 9.2 Alarm example
- 9.3 Effects of BACnet properties on alarm response
- 9.4 Alarm response of the function blocks
- 9.5 Alarm functions
- 9.6 Alarm management by notification class
- 9.7 Alarm routing over the network
- 9.8 Alarm queuing
- 9.9 Common alarms
- 9.10 Alarm suppression
- 9.11 Alarm message texts
- 10 Calendars and schedulers
- 11 Trending
- 12 Reports
- 13 Data storage
- 14 Network architecture
- 15 Remote access
- 16 Management platform
- 17 Desigo Control Point
- 18 Automation stations
- 19 Logical I/O blocks
- 20 Room automation
- 21 Desigo Open
- 22 System configuration
- 22.1 Technical limits and limit values
- 22.2 Maximum number of elements in a network area
- 22.3 Desigo room automation system function group limits
- 22.4 Devices
- 22.4.1 PXC..D automation stations / system controllers
- 22.4.2 LonWorks system controllers
- 22.4.3 Automation stations with LonWorks integration
- 22.4.4 PX Open integration (PXC001.D/-E.D)
- 22.4.5 PX Open integration (PXC001.D/-E.D + PXA40-RS1)
- 22.4.6 PX Open integration (PXC001.D/-E.D + PXA40-RS2)
- 22.4.7 PX KNX integration (PXC001.D/-E.D)
- 22.4.8 TX Open integration (TXI1/2/2-S.OPEN)
- 22.4.9 Number of data points on Desigo room automation stations
- 22.4.10 Number of data points for PXC3
- 22.4.11 Number of data points for DXR1
- 22.4.12 Number of data points for DXR2
- 22.4.13 PXM20 operator unit
- 22.4.14 PXM10 operator unit
- 22.4.15 Desigo Control Point
- 22.4.16 PXG3.L and PXG3.M BACnet routers
- 22.4.17 SX OPC
- 22.4.18 Desigo CC
- 22.4.19 Desigo Insight
- 22.4.20 Desigo Xworks Plus (XWP)
- 22.4.21 Desigo Automation Building Tool (ABT)
- 22.5 Applications
- 23 Compatibility
- 23.1 Desigo version compatibility definition
- 23.2 Desigo system compatibility basics
- 23.2.1 Compatibility with BACnet standard
- 23.2.2 Compatibility with operating systems
- 23.2.3 Compatibility with SQL servers
- 23.2.4 Compatibility with Microsoft Office
- 23.2.5 Compatibility with web browsers
- 23.2.6 Compatibility with ABT Go
- 23.2.7 Compatibility with VMware (virtual infrastructure)
- 23.2.8 Compatibility of software/libraries on the same PC
- 23.2.9 Hardware and firmware compatibility
- 23.2.10 Backward compatibility
- 23.2.11 Engineering compatibility
- 23.2.12 Compatibility with Desigo Configuration Module (DCM)
- 23.2.13 Compatibility with Desigo PX / Desigo room automation
- 23.2.14 Compatibility with Desigo RX tool
- 23.2.15 Compatibility with TX-I/O
- 23.2.16 Compatibility with TX Open
- 23.3 Desigo Control Point
- 23.4 Upgrading from Desigo V6.2 Update (or Update 2) to V6.2 Update 3
- 23.5 Siemens WEoF clients
- 23.6 Migration compatibility
- 23.7 Hardware requirements of Desigo software products
- 24 Desigo PXC4 and PXC5
- 25 Compatibility of Desigo V6.2 Update 3 with PXC4 and PXC5
System overview
Data maintenance
3
26 | 351 CM110664en_07
D-MAP program
The D-MAP program is an executable program, and contains instances of the function blocks with the
associated process data and parameter settings, the configuration and description data and the
interconnection and order of processing of function blocks.
The D-MAP program can be modified during operation either by reloading the complete program including
any changes, or by delta (differential) loading. Delta loading only reloads the changes.
The D-MAP program is generated in XWP/ABT from the information in the program charts, compiled and
downloaded into the automation station.
Libraries (LibSet)
The Desigo Library Set (LibSet) is a set of mutually interdependent libraries that belong to a given Desigo
system version.
The library contents are continuously extended. Every
LibSet Extension of Desigo
(LED) is a
comprehensively tested collection of solutions covering all the necessary parts of the Desigo system.
The LibSet version number defines which LED runs on which system version. The first part of the version
number represents the applicable system version.
A LED includes the latest library per automation station type (PXC, PXC00(-E).D, PXX-L11/12, PXKNX) for
the latest Valid Version Set.
New LEDs are delivered at regular intervals. The individual LEDs are consecutively numbered (LED0 to
LED16).
LibSet version number
Desigo LibSet consists of various libraries for all system levels:
● Shared text library for PXC, PX KNX, PXE, PXR
● PXC library
Firmwareblocks
PXC00(-E).D
PXX-L11/12
PXE
PXC
RXB
Firmwareblocks
Firmwareblocks
PX KNX
ABT
For RXB Applications:
PXC00-U with dedicated
firmware version and
option modul PXA30-K11
needed. No I/O modules
possible.
*
Solution Library TRA
Preconfigured PXC3
Application functions
Charts
Function blocks
Inputs & Outputs
Networked devices
Text catalog
E.g. global texts as:
TD short name
TD descriptions
-
-
-
...
DESIGO-LibSet-HQ-230020-02
DESIGO Libset counter: 02,04,06,08,10...
Version number
System version (for example, 230 for DESIGO V2.3)