User Manual

Remote access
Remote access methods
15
204 | 351 CM110664en_07
15 Remote access
The remote access is an access to resources via the internet or a point-to-point connection.
The remote access is used to:
● Connect a remote location to Desigo CC, e.g., for on-call service, managing different locations or
support by a specialist
● Remotely access Desigo CC
● Make a change, create an extension or search for errors using an engineering tool
● Forward alarms as text messages or emails from Desigo Control Point or Desigo CC
15.1 Remote access methods
There are two remote access methods:
● Methods that establish a direct point-to-point connection
● Methods that use public networks (e.g., telephone networks for accessing the internet) as a transport
medium
The following access networks can be used for the remote access:
● Telephone network
● TV cable network
● Other cable-based networks, such as metro ethernet
● Mobile networks
● Other RF-based access networks
Telephone network-based technologies
DSL variants
Characteristics of DSL variants:
● There are different ADSL and VDSL variants. The DSL variants are country-specific.
● The uplink (that is, the data flows from your private home or project to the internet) and downlink (that
is, the opposite direction) bandwidth are different. Take this into account when you select a suitable
internet access.
Touch Panel
Modem
BACnet/IP
Web interface
Metro ethernet
Radio
Mobile phone
10664Z45en_0
2
Desigo CC
Automation station
TV cabel