User Manual

Desigo workflow, tools and programming
Workflow for room automation classic
4
44 | 351 CM110664en_07
● Program in CFC
● Define points in the I/O Address Editor
● Parameterize in the Parameter Editor
● Define alarming and trending
DNT and DPT
Test and commission:
● Export data to Desigo CC
● Download firmware (upgrade if necessary)
● Load configurations and programs
● Carry out point test
● Debug in CFC (if necessary)
● Create commissioning documentation (local reports)
● Specialties:
– Integration (TX Open Tool, BIM Tool)
– AL Mig (AL Mig Tool)
– Simulation
XWP Report Manager
Create documentation:
● Create project documentation
4.8 Workflow for room automation classic
See
Desigo Xworks Plus Overview of Workflows (CM111000).
4.9 Workflow for Desigo room automation
XWP
Create project:
● Create project
● ACP (passwords for accessing the automation stations)
ABT Site > Building
Create project structure (the building structure is room-oriented):
● Create building topology (buildings, floors)
● (Optional) Create user-specific building topology (UD structure)
● Create network topology (define address ranges)
● Create documentation (XWP Report Manager)
ABT Pro and ABT Site > Configuration
Create project library:
Standard Applications (Types on DXR)
Customized Applications (PXC3, DXR, PXC00)
XWP
Building
(ABT Site)
ABT Pro
Configuration
(ABT Site)
Startup (ABT
Site)
XWP
Network
Configurator
Reports (ABT
Site)