User Manual

Desigo Open
Desigo RXB
21
306 | 351 CM110664en_07
21 Desigo Open
Desigo Open lets you integrate devices and systems from different manufacturers into the Desigo system.
Integration with Desigo Open offers:
● Standardized automated functions, operating and monitoring of the entire building
● Single-station operation, common view and display. Simplified multidisciplinary operation, common
reporting and common alarm management.
● Peer-to-peer interaction, communication on the automation level, automated interactions and data
exchange
● Comfort combined with lower energy consumption. New opportunities to save energy with systems that
communicate among themselves. Improved performance, efficiency evaluation, flexibility and ability to
modify system operation and configuration without re-cabling or new hardware.
● Engineering of integrated solutions in Xworks Plus (XWP)
● Reduced risk thanks to standard solutions. Clear functions that cover the most important standard
protocols.
Topology
Third-party devices and systems can be integrated with Desigo on all levels.
Which protocols does Desigo support?
Desigo Open System Protocol
Desigo CC SCADA, etc.
PX Open Modbus, KNX/EIB, LonWorks, M-Bus, SCL, etc.
TX Open Modbus, M-Bus, GENIbus, etc.
Room level (Desigo room automation and RX) DALI, KNX, EnOcean, LonWorks
Which plant sections can be integrated into Desigo on which level?
L W ON ORKS
System controller
TX-I/O-
Modules
Desigo CC
QAX9..
EnOcean
Room units
PX Open
PXC50/100/200..D
Modular
TX Open
PX KNX
System conroller
PXC001..D
PXC...D
Compact
RXZ97.1/KNX
RS232
RS485
Desigo Control Point
Adapter
BACnet Third-party system
Field and room level Automation level Management level
BACnet/LonTalk or BACnet/IP
Third-party system
KNX S-Mode / EIB or Bus
L W ON ORKS
Third-party system
KNX/EIB
Third-party system
RXB
Room controller
Third-party system
Peer-to-peer communication via BACnet
PXC001..D