User Manual

System overview
Views
3
30 | 351 CM110664en_07
Desigo CC
The application libraries for Desigo CC are delivered as extension modules for the respective system
versions.
For information about compatibility, see
Desigo CC System Description (A6V10415500).
3.10 Views
There are four views:
● Technical view
● User view
● System view
● Program view
Technical view
The technical view illustrates the technical building services equipment, such as HVAC systems and
associated elements, in the building automation and control system. The technical view is always present
and can be used as a substitute for the user view if the user does not have his own user designation.
User view
Freely defined and structural user view
The user view is optional in a project. The user view is based on user designations, e.g.:
PL7’FL3’ELE”HEAT.STPT
The structure and syntax of the user designations can be defined for each specific project and customer.
Example of a structure: Installation/building/room/plant element/signal
User view via the User Designation (UD)
Desigo supports different user views, depending on the application:
In Xworks Plus (XWP) a User Designation (UD) can be entered for function blocks or compounds in
addition to the Technical Designation (TD) and description. This entry is carried through in the system and
can be evaluated by clients. The UD allows customers to use their own preferred designations for the plant
Storen1
Storen2
Storen3
Storen4
PXM20
Site
Technical View
Technical View
Room
Blinds
protection
BACnet
objects
Technical View
10523Z05en_01