User Manual

Technical
view
Standard plant structures
6
CM110664en_07 115 | 351
6 Technical view
The technical view illustrates the technical building services equipment, such as HVAC systems and
associated elements, in the building automation and control system.
The technical view helps organize measured and controlled physical variables from specific, technical
installations in a building. The technical view is modeled with structure objects. The structure of the
technical view represents the hierarchy of the technical installations. Objects representing variables, such
as setpoints or operating modes supplement the view.
Plant types
The technical view contains all the conceptual objects in the system. The following plant types have been
defined for descriptions and categories:
●
Primary plant : All physical plants that are directly controlled from the automation level, e.g., heating
systems, ventilation systems, etc.
●
Room automation : Individual room controls.
●
Global objects : Data objects which exist simultaneously in several automation stations at the
automation level, e.g., an exception calendar for the time schedules of all plants. These objects are
combined as a virtual plant in a global area and can be invoked as such (global data).
The technical view can be used for other disciplines integrated via PX Open. The technical view and the
associated technical designations can be set up in the compounds library.
6.1 Standard plant structures
To display different plants in a uniform manner, a standard hierarchical plant structure has been created
for each plant type.
Primary plants with Desigo PX
Structure
KNG:ABdb6'AHU3Fl'FanSu
Burner
Sensor
Heat
generation
Group SGroup N
Area Gubelstrasse
Heat distribution
Air handling, 3rd floor