User's Manual

Réf. :
Mémo :
Date : 21/08/02
- 8 -
Siemens Transportation Systems exclusive property
4. CONFIGURATION OF THE MENU
Figure 6 : Configuration of the menu
Notes :
§ When powered on, the MRAD begins to emit with the previous parameters. If no
parameter was ever entered, there is a warning : “the Tx mode is unknown” and all
parameters (Tx mode, RF output, frequency, power level) must be defined.
§ During the RF configuration, the MRAD continues to emit.
§ Each new parameter is applied immediately after input.
5. DOWNLOADING A NEW FPGA CODE
To download a new FPGA code, the menu 1 (“Download a new FPGA code”) has to be
chosen and confirmed. Then, the FPGA code is erased and the menu waits for a
programming file *.hex.