User's Manual

Réf. :
Mémo :
Date : 21/08/02
- 3 -
Siemens Transportation Systems exclusive property
1.2.3. RF outputs of the CRE
§ Two outputs respectively identified as RFA1 and RFA2 for the CRU-A (CRU-B is not
used).
§ 50 Ohm coaxial cable terminated by a N male type plug.
1.2.4. View of the CRE
Figure 2 : The CRE
2. INSTRUCTIONS FOR THE MRAD
2.1. Power on
LED status after
less than 15 s at
power on
Meaning Action
Medium intensity
Tx permanent mode
(4.125ms/4.125ms)
None
Flashing,
high intensity,
5s on / 5s off
Tx permanent mode
(5s/5s)
None
Other
Possibly RF parameters
undefined
Configure with the terminal menu – If no
change, power off, and power on again.