Installation Instructions
Table Of Contents
- SCOPE
- RELATED DOCUMENTS
- TERMINOLOGY
- INSTALLATION INSTRUCTIONS
- RF TEST INSTRUCTIONS (WAYSIDE)
- RF TEST INSTRUCTIONS (CARBORNE)
- ANNEX 1: GENRAL CONFIGURATION 1 – PARTS LIST
- ANNEX 2 – GENERAL CONFIGURATION 2 – PARTS LIST
- ANNEX 3A: GENERAL CONFIGURATION 3A– PARTS LIST
- ANNEX 3B: GENERAL CONFIGURATION 3B – PARTS LIST
- ANNEX 4A: GENERAL CONFIGURATION 4A – PARTS LIST
- ANNEX 4B: GENERAL CONFIGURATION 4B – PARTS LIST
- ANNEX 5A: GENERAL CONFIGURATION 5A – PARTS LIST
- ANNEX 5B: GENERAL CONFIGURATION 5B – PARTS LIST
- ANNEX A: ANTENNA CONFIGURATION A
- ANNEX B: ANTENNA CONFIGURATION B
- ANNEX C: ANTENNA CONFIGURATION C
- ANNEX D: ANTENNA CONFIGURATION D
- ANNEX TR: TEST RECORD

New York City Transit
Réf. : Ed/Rév :
00/02
Trad.: --
Mémo Date
: : 01/28/2003
DCS RF INSTALLATION INSTRUCTIONS
- 27 / 38 -
Siemens Transportation Sy clusive property
stems ex
a a
12 - 4 3A
5.1 13.9
36
a a
13 - 1 3A
5.1 13.9
36
a a
13 - 2 3A
5.1 13.9
36
a a
13 - 3 3A
5.1 13.9
36
a a
13 - 4 3A
5.1 13.9
36
a a
14 - 1 3A
5.1 9
36
a a
14 - 2 3B
2.1 6
36
a a
14 - 3 3A
5.1 9
36
a a
J-1-1 3A
5.1 9
36
a
a
J-1-2 3A
5.1 9
36
Note 1: FCC limit must be higher than Calculated value. If not insert attenuation in 1 dB steps at WRU output to lower the RF power output.
In Column C, a and b refer to the type N output connectors on each transmitter case as applicable. Calculated value for a and b must comply.
Note 2: The above table is provided as an example for this specific Canarsie installation and is preliminary. For other applications, the table will be
modified for the specific layout and will be made available.
.