Product manual

Product Manual U42006-J-Z795-1-7600
Looking up information
9 The diagnostic file
MT9750 logs various activities such as the opening and closing of sessions, the
starting and ending of the emulator, and the termination of the connection in a
MT9750.DIA file.
The maximum size this file can reach in ASCII format is 500 Kbytes. If this is
exceeded, the file is saved with the filename extension .OLD and further results
are written to a new diagnostic file. This file is created in the configuration direc-
tory, unless otherwise configured.
An example of entries in the MT9750.DIA file:
1 25.09.95 14:53:59.24 A41C MT9750 4.1A0002 sym 10 FF 0000000000FF
2 25.09.95 14:54:20.72 A41C MT9750 4.1A0002 sym 10 02 000000000000
9.1 Configuring the diagnostic tool
Diagnostics are activated when the emulator is supplied; the diagnostic file is
created in the configuration directory.
You can change these settings. To do this, append a section Diagnostics to the
MT9750.INI file as follows:
[Diagnostics]
TracePath=C:\DIAG
DiagSize=0
TracePath:
Specify the path for the diagnostic file here. If this path does not exist on
your PC, the file is written to the directory of shared files (default).
DiagSize:
This parameter specifies the size of the diagnostic file in Kbytes. The
values can range from 0 to 500. If DiagSize=0 is set, the data is not writ-
ten to the diagnostic file.