Product manual

Product Manual U42006-J-Z795-1-7600

Working in emulation sessions Status line display

XREQ

XREQ stands for send request and always lights up when a key that initiates

exchange of data is pressed. The light goes out when the data exchange has

begun or you press the key.

XREQ flashes once data exchange is cancel-

led.

The following error messages are only displayed if you are using a card reader:

CARD INVALID

The display shows that the card has not been read correctly. Try to insert the

card in the reader once more. If the card is defective or invalid, use a new card.

CARD BLANK

The card was inserted incorrectly or a blank ID card was used. Insert the card

into the card reader in the correct position or use a new card.