Product manual

Product Manual U42006-J-Z795-1-7600

Working in emulation sessions The emulation utilities

The keyboard mapping program can only be used with the mouse. It can

be configured for fast access to certain functions using a toolbar (menu:

Settings: Toolbar).

If certain characters (e.g.national characters, ê) are to be mapped to the key-

board, these must be copied to the keyboard from the Character Set menu. The

procedure for doing this is described in the following sections.

Creating an individual keyboard mapping

When you call the keyboard mapping program from the emulation Utilities

menu, the last keyboard mapping loaded is displayed. If you call it by clicking

on an icon, the mapping to be changed first has to be opened.

Using the File menu you can load another keyboard assignment, or save the

changed assignment under a new or old name.

Proceed as follows to change the keyboard mapping:

Ê Open the file with the mapping you want to change (this is not necessary

when calling the program from the emulation).

Ê Click on the item containing the desired mapping. This item can be another

key, a 9750 function from Display: Functions, or a special character from Dis-

play: Character Set. The item is highlighted.

Ê Click on the key whose mapping you want to change. To do this, you may

need to switch keyboard levels using the Level menu.

Ê Repeat this process for each key to be assigned.

Ê Save the new mapping under File: Save. The extension of a keyboard map-

ping file should be .KMP. If a keyboard mapping you created is to be loaded

in a session, you can use the Settings: Keyboard Mappings: Load Mapping

menu to do so.

If you change the keyboard mapping from the emulation, the change is

effective immediately and need not be saved first.