Product manual

Product Manual U42006-J-Z795-1-7600
Configuration Troubleshooting
6.5 Troubleshooting
An emulation program is a software product that cannot operate unless the fol-
lowing components are configured correctly:
● PC
● Interface boards
● Host
In addition, you should check the following points if you have problems:
6.5.1 Configuring MT9750
Ensure that the correct character set is selected in the DSS Mode dialog box in
the Configuration menu.
If necessary, check the setting of the DSS Type as well.
6.5.2 Connection
You may have made a mistake when setting the connection method.
Ensure that the host name you entered matches either the host name configu-
red on the name server or the host name in the lmhosts file.
6.5.3 BS2000 host
Communication errors may be caused by the host generation. To see if this is
the case, check the following:
Communicating with the BS2000 host
The following command line - which you enter at an MS-DOS prompt - can be
used to check whether the host is responding to your input at all:
ping [host_name] or
ping <IP_address>