Product manual

Product Manual U42006-J-Z795-1-7600

Configuration Configuring the printer

6.4 Configuring the printer

This section describes how to configure MT9750 to print screen contents as well

as host files. Information on printing can be found in the chapter “Printing“.

When configuring a printer, a distinction is made between adjusting to the print

data stream that comes from the host (host printer) and the print data stream

that goes to the connected printer (local printer).

6.4.1 Local printer

The local printer is a printer that is connected to your PC. MT9750 allows the

connection of printers supported by Windows. The local printer configuration is

global, i.e. it is not only valid for the current MT9750 session, but all MT9750

sessions.

Hardcopy printing (complete or screen shots) and bypass printing are perfor-

med on the local printer.

Points to remember when printing host files (bypass printing):

If you are using a Windows printer that is different from the one specified

in the host generation, MT9750 converts the host data. To do this,

MT9750 must know the format of the print data sent from the host. The

conversion is configured by specifying the host printer. For more detailed

information see the section “Host printer“.