Product manual

Product Manual U42006-J-Z795-1-7600
Configuration Converting session files from a preceding version
6.3 Converting session files from a preceding
version
If you already have a preceding version of MT9750 installed and want to retain
the existing session configuration, you can use a program supplied for this very
purpose that converts the data from the old configuration files (CONNECT.INI,
DIR1, and MTS files) to the new format.
You call the conversion tool (MTKonv) from the MT9750 start group. You must
reinstall the component if this entry is not available. For more information, see
“Reinstalling components“.
Once you call the program, the following interface in which you enter the paths
of the configuration to be converted is displayed.
Proceed as follows to convert the session files:
Ê First specify the files in which the old connection configuration is stored. To
do this, change to the configuration directory of the preceding version under
Conversion: Select connect.ini and select the connect.ini file used. Then specify
the DIR1 file used under Conversion: Select DIR1. For both menu items used,
the icons labeled “C” and “D” are also available when the toolbar is enabled.