Product manual

Product Manual U42006-J-Z795-1-7600
Configuration MT9750 session
6.2.2.1 Special terminal parameters
Certain events that occur while working with MT9750 are displayed and queried
using messages. The related operator actions may disrupt the work in the emu-
lation in certain circumstances. You have the option of disabling the following
dialogs in the Configuration: Special Parameters ... dialog box:
– Dialog for modified session parameters
– Connection shutdown dialog (TCP/IP connections)
Click on the desired option to disable the corresponding message. In the case
of modified session parameters, the changes are stored automatically.
The Partner Characteristics parameter only relates to passive sessions and is
described in the next section.
6.2.3 Configuring passive sessions
Passive sessions are required in LAN connections to allow bypass printing. To
do this, a session with a passive connection name is opened. This initializes its-
elf as an icon and waits for a connection request from the host. Passive sessi-
ons can also be provided for dialog applications in which the connection is esta-
blished by the host.
If the host application uses information about the attributes of the data display
terminal (partner characteristics) to edit the (print) data stream, you also have
to change the Partner Characteristics parameter to configure the printer (see
below). These parameters can be found under Configuration: Special Parameters:
Terminal/Printer. Click on the setting long. Generally, however, this parameter
need not be changed.