Product manual

Product Manual U42006-J-Z795-1-7600

Configuration MT9750 session

DSS mode should always be matched with the respective host applica-

tion.

If you want to work with 8-bit character sets, EHCS

or XHCS must also be

installed on the BS2000 host.

Character Set:

This specifies which national character set should be displayed on the

screen in 7-bit mode (or 8-bit mode if you wish). Choose the character

set here that is used by the host application.

DSS Interconnection:

If your computer is specified in the BS2000 generation as attached to a

computer, you can expect mistakes in the character representation and

you must change these parameters.

DSS Type:

Some host applications check the type of data display terminal connec-

ted. MT9750 sessions respond as 9750 data display terminals unless

otherwise specified. If the host application is expecting a different type,

you can change the MT9750 parameter so that the host application does

not have to be adjusted.