Product manual

Product Manual U42006-J-Z795-1-7600
Configuration MT9750 session
6.2.2 Configuring the data display terminal
The following sections contain information on the data display terminal parame-
ters that you may need to adjust. The parameters are found under Configuration:
Terminal Settings (DSS).... As the parameters are session-specific, you can only
configure them if you have configured and opened a session.
Ê If you do not have a session open as described above, open one now.
Ê Select Terminal Settings (DSS)... in the Configuration menu.
Ê In the dialog box that appears, enter the DSS Mode, DSS Interconnection, DSS
Type, and Character Set parameters.
DSS Mode:
DSS mode sets an operating mode locally that affects the character set
to be used. If 7-bit
DSS mode is set, a 7-bit character set that corre-
sponds to the current country-specific variant is used. The following
country-specific variants are supported:
– Danish
– German
– English
– French
– International
– Italian
– Swedish
– Spanish
If you are using 8-bit character mode, a total of 191 characters and sym-
bols are available to you. The character set variants of the 8859-1, -2, -5,
-7, and -9 ISO standard are supported in this mode.