Product manual

Product Manual U42006-J-Z795-1-7600
Configuration MT9750 session
Using the LAN-INET format
If you activate the LAN-INET option, the appearance of the dialog box changes
somewhat: the fields under Partner and Local are assigned different input opti-
ons.
As is the case with RFC1006 format, with active sessions you must also enter
the name of the host with which you want to communicate. In place of the host
application, under LAN-INET specify the port number that is generated in the
host application. If in doubt about the host generation, ask your host administra-
tor.
A port number is entered instead of the station under LAN-INET in the local con-
figuration of the emulation session also. However this is not absolutely neces-
sary in many applications and can remain blank. In this case, the emulation
automatically allocates the session a free port. If your host application, on the
other hand, is expecting a specific port (e.g. UTM applications or filetransfer),
enter it under Local: Port Number.
The advanced settings in LAN-INET format are the same as in RFC1006 for-
mat; therefore for an explanation read the section “Advanced options of the
9750 session“ in this chapter.