Product manual

Product Manual U42006-J-Z795-1-7600
Configuration MT9750 session
Ê In the Partner field, enter the Host Name as well as the host Application (optio-
nal) that you want to work with. As you can see, the default port for RFC1006
connections (102) is entered under Port Number. This cannot be changed. If
you require another port, you must change to LAN-INET format.
Ê If your host application is expecting a specific station for establishing a con-
nection, you can specify it under Local: Station; otherwise leave this field
blank and the station is allocated dynamically.
These specifications are generally all that are required to define a session. You
can therefore confirm your specifications with OK and the connection to the
BS2000 host is opened.
Further advanced options are required for specific uses (e.g. passive sessions).
You can specify these options if you click on the Advanced button in the dialog
box for configuring a session.
Advanced options of the 9750 session
This dialog box allows you to specify the station type of your session, specify a
short name, and modify the mode (active or passive session). The station type
is needed by some host applications to check the characteristics of the terminal
connected. However the parameters affect only the establishment of the con-
nection and have no effect on the characteristics of your emulation session. The
session short name (one character) is used by PC applications to exchange
data with the corresponding session.