Product manual

Product Manual U42006-J-Z795-1-7600
Installation Deinstalling MT9750
Local printer
You can use a Windows printer connected to your PC from MT9750 for printing
host files.
A Windows printer can only be connected to a port supported by Windows
(LPT1, LPT2, LPT3, COM1, COM2, COM3, COM4). Further information on this
can be found in the Microsoft Windows User Guide.
Information on configuring local printers under MT9750 can be found in the sec-
tion “Configuring the printer” in the “Configuration” chapter.
5.5 Deinstalling MT9750
Proceed as follows to delete the MT9750 software from your system and undo
the entries in the Windows registry:
Ê Double-click on the Software icon in the Control Panel. You can access the
Control Panel window under Start: Settings: Control Panel.
Ê The Add/Remove Programs dialog box lists the software installed on your
system. Depending on the installed components, it also contains the
MT9750 entries: Siemens Nixdorf MT9750 V5.0, Siemens Nixdorf KBDMAP, Sie-
mens Nixdorf VFT32.
Ê Select the components that you want to remove from your system and con-
firm your selection by pressing the Add/Remove ... button. A dialog box for sel-
ecting the delete dialog language is displayed.
Ê Confirm your preferred language with OK. A dialog box containing informa-
tion on the software components selected for deletion is displayed. You can
still cancel deletion of the software by pressing the Cancel button.
Ê If you are sure that you want to delete the displayed components, confirm
the dialog box with OK and the software and the registry entries are removed
from your system.
Ê Repeat this procedure for each component to be deleted.