Product manual

Product Manual U42006-J-Z795-1-7600
Installation Installing the PC software
5.2.2 The installation program
The options that you are offered when you call the MT9750 installation program
depend on whether you already have a version of MT9750 V5.0 installed. If you
do not, you have the following selection options:
– Minimum installation
– Standard installation
– User-defined installation
– Distributed installation
You are offered the last option only if you are installing from a prepared server.
Minimum installation
This option installs only the necessary MT9750 components. Further programs,
for example VFT (Virtual File Transfer) are not installed. You can, however,
install these at a later point in time.
Standard installation
This option installs the standard elements contained in MT9750 V5.0, i.e. the
emulation, KBDMAP, and the conversion program for old configuration files.
User-defined installation
You should only perform a user-defined installation if you already know the pro-
gram (e.g. from the preceding version). With this installation type you select the
components to be installed from a list. All of the files that are required for a com-
ponent are always copied.
Distributed installation
If you install the MT9750 V5.0 software from a prepared server, you can perform
the installation in such a way that the program files remain on the server and
your Windows start menu contains appropriate links after the installation. In this
case, only the necessary configuration files are copied locally to your PC.
With distributed installation, you can also select the components to be installed
from the list of available components, if required.