Product manual

Product Manual U42006-J-Z795-1-7600
Installation The individual installation steps
5.1 The individual installation steps
When installing the MT9750 emulation, various components (BS2000 host,
data transfer facilities, interface boards, emulation software) are connected logi-
cally. You should note the sequence for installing the emulation described in the
following section to ensure smooth operation of MT9750.
– First establish whether your PC can connect to the BS2000 system via a
LAN connection. The host system administrator will be able to give you the
relevant information. You can also ask him what preparations he should
carry out for you on the host (this depends on the applications you want to
use).
– Ensure that you have a TCP/IP connection to the host (e.g. using the ping
<host-ip> command).
– Once you have set up the hardware required for operating MT9750, you can
start installing and configuring the software on your PC.
5.1.1 Selecting the language for the installation and user
dialogs
Once the setup program is started, a dialog box is displayed in which you can
select whether the setup program should be started in German or English. This
selection only defines the language of the distribution program and the lan-
guage which is displayed for the manuals. The language for the installation of
MT9750 is selected at the beginning of the installation program (after calling up
“Installation“).The language you specify also affects the user interface of the
installed program, from the start-up menu entries to the emulation interface.