Specifications

Installing/removing PCMCIA System upgrades
2
3
1
a
4
Place the cover on its mounting location (1) and flap the cover into place on the
underside of the notebook (2).
Push the cover as far as it will go in the direction of the arrow (3).
Fasten the cover with the two screws (4).
Turn the notebook over and place it on a flat surface with the underside facing
downwards.
Reconnect the cables you previously disconnected.
Installing and removing PCMCIA cards
You can install either two 3.3mm (type I) or 5.5mm (type II) PCMCIA cards, or one
10.5mm (type III) PCMCIA card in the notebook.
!
The PCMCIA card must not consume more than 600mA (at +5V) or 60mA
(at +12V).
Consult the documentation supplied by the card's manufacturer and follow
the instructions provided.
Never use force when inserting or removing a PCMCIA card.
Make sure that foreign objects do not fall into the PCMCIA slot.
A26391-K64-Z100-2-7619 77