Specifications

System expansion Adding/removing memory (PCD-5ND)
Removal
Switch off the notebook.
Close the cover of the notebook so that it locks into place on the left and right.
Disconnect any cables attached to the notebook.
Place the notebook bottom-up on a flat surface.
1
2
3
Remove both screws (1).
Pull the cover in the direction of the arrow (2) and lift it off the notebook (3).
1
2
1
Carefully press the two retaining clips outwards (1).
The memory module will flap up.
Pull the memory module out of the notebook (2).
Remove the second memory module in the same way.
76 A26391-K64-Z100-2-7619