Specifications

System expansion
!
Only use system upgrades that meet the requirements and guidelines
concerning safety, RFI, EMC and telecommunications terminal equipment
(see the section "Important notes").
Adding/removing memory (PCD-4ND)
The notebook PCD-4ND is fitted with a standard 4 Mbytes of main memory (RAM).
This can be increased to either 8 Mbytes or 20 Mbytes with a memory upgrade
card.
!
Only use memory upgrades designed specifically for this notebook.
Never use force when installing or removing a memory upgrade.
Make sure that foreign objects do not fall into the memory upgrade slot.
Installation
Switch off the notebook.
Close the cover of the notebook so that it locks into place on the left and right.
Disconnect any cables attached to the notebook.
Place the notebook bottom-up on a flat surface.
A26391-K64-Z100-2-7619 71