Specifications

System configuration Power Management Setup
Setting up the power management features -
Power Management Setup
You can do the following in the Power Management Setup submenu:
– Enable/disable the power management features (in the field marked
Power Management)
– Specify the response to display output (in the field marked
Video Access Trigger)
– Enable/disable Doze mode (in the field marked Doze Mode)
– Enable/disable Standby mode (in the field marked System Auto Standby)
– Enable/disable Suspend mode (in the field marked System Auto Suspend)
– Enable/disable automatic display power-down (in the field marked
LCD Power Down)
– Enable/disable the hard disk's power saving features (in the field marked
Hard Disk Power Down)
– Set the CPU speed (in the field marked CPU Speed)
– Enable/disable the system speaker (in the field marked System Speaker)
– Deep-discharge the battery (in the field marked Deep Discharge)
F3A21 Power Management Setup 03.07.95
---------------------------------------------------------------------------
Power Management: Enable for Battery Powered Only
Video Access Trigger: Enable
Doze Mode: Enable
System Auto Standby: 2 Minutes
System Auto Suspend: 4 Minutes
LCD Powerdown: 1 Minute
Hard Disk Powerdown: 2 Minutes
CPU Speed: High
System Speaker: Enable
Deep Discharge: Disable
---------------------------------------------------------------------------
Esc F3 F4 F5 F10 ↑↓ ←/→
Main Menu Set Default Long Life High Performance Save Field Value
The Power Management submenu
Long Life mode
You can select the Long Life mode by pressing function key
F4 . The Long Life
mode uses all the available power management features to conserve power. The
notebook uses little power and operates slightly slower than usual.
To re-enable the default power management features, press function key
F3 .
64 A26391-K64-Z100-2-7619