Specifications

Setting up security features - Security Setup System configuration
If you do not wish to use the system password as the setup password or if you wish
to change the setup password:
Select Setup Lock.
Enter the new setup password and press the Enter key.
Enter the new setup password a second time to confirm it and press the Enter
key. The following message is displayed:
New password is now installed, press any key ...
Press any key to continue.
Select Setup Lock.
Insert the disk System Utilities in the floppy disk drive.
Press the Enter key.
The setup password is saved in encrypted form on the disk System Utilities.
Docking unit password
This field only appears if the notebook is connected to a docking unit. It lets you
specify whether docking-unit access is to be controlled by means of a password.
Enable You have to enter a password in order access the docking unit.
Disable You can access the docking unit without having to enter a
password (default).
If you wish to specify a docking unit password:
Select Docking Unit Password.
If the field is set to Disable, change this setting to Enable.
Enter a docking unit password and press the Enter key.
The password can consist of a maximum of eight letters and numbers.
Enter the docking unit password a second time to confirm it and press the Enter
key. The following message is displayed:
New password is now installed, press any key ...
Press any key to continue.
A26391-K64-Z100-2-7619 61