Specifications

System configuration Setting up security features - Security Setup
If you want to specify or change a setup password:
Select Setup Lock.
Select Enable.
Enter a setup password and press the Enter key.
Enter the setup password a second time to confirm it and press the Enter key.
The following message is displayed:
New password is now installed, press any key ...
Press any key to continue.
Select Setup Lock.
Insert the disk System Utilities in the floppy disk drive.
Press the Enter key.
The setup password is saved in encrypted form on the disk System Utilities.
If you have not defined a setup password and you wish to use the system
password as the setup password:
Select Setup Lock.
If the field is set to Disable, change this setting to Enable.
Insert the disk System Utilities in the floppy disk drive.
Press the Enter key.
The setup password is saved in encrypted form on the disk System Utilities.
60 A26391-K64-Z100-2-7619