Specifications

System configuration System settings - System Setup
Mode
This field defines whether the parallel port is used as an input/output device or just
as an output device. The EPP and ECP transmission modes can also be enabled.
The data transmission rates can be increased to 2 and 2.4 MB/s with these modes.
The peripheral equipment and associated drivers which support these modes are
required. (see Documentation of peripheral equipment).
Bidirectional Data can be received and transmitted (default).
EPP 1.7 EPP1.7 standard transmission mode (enhanced parallel port).
EPP 1.9 EPP1.9 standard transmission mode (enhanced parallel port).
Extended (ECP) Extended capability port transmission mode.
Unidirectional Data can only be transmitted.
Shadow BIOS
The Shadow BIOS field is always set to Enable.
The system BIOS is copied to faster RAM when the notebook is switched on.
Cache Memory
This field is used to enable and disable the cache memory.
If the access time is too fast for certain application programs, you should disable
the cache memory.
Enable Part of main memory is mapped to high-speed cache memory.
(default).
Disable The cache memory is not used.
Pointing Device
This field is used to specify the type of pointing device used.
PS/2 Type Select this option to use the built-in trackball or a PS/2 mouse
(default).
Serial Type Select this option if you wish to use a serial mouse. If you use a
serial mouse, you will have to load the appropriate device driver.
Quick Boot
This field is used to specify the type of power-on self-test carried out by the
notebook.
Enable A short, limited-scope test is carried out when the notebook is
switched on.
Disable A longer, full test is carried out when the notebook is switched on
(default).
54 A26391-K64-Z100-2-7619