Specifications

The battery Operation
Connecting the power supply unit
Switch off the notebook.
Place the notebook on a level, stable surface.
2
3
b
a
1
Plug the DC output connector on the power supply unit into the DC input
connector on the notebook (1).
!
The power cord conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for
use in the country in which you intend to use it.
The notebook and the power supply should be at least 200 mm apart. Keep
the area within 100 mm of the notebook and the power supply unit clear.
Do not cover the ventilation slots in the notebook and the power supply unit.
Do not stand the power adapter on heat-sensitive material.
The power supply unit's AC cord may only be connected to a grounded wall
outlet if the notebook is connected to the power supply unit.
Connect the AC power cord to the power supply unit (2).
Connect the AC power cord to a grounded wall outlet (3).
The LED on the power supply unit goes on (b). A few seconds later, the
notebook's BATTERY LED lights up. The battery begins to charge.
!
Switch the notebook off before you disconnect it from its power supply unit.
A26391-K64-Z100-2-7619 39