Specifications

Operation Using the security features
Setup Lock
The Setup program will only start if you enter the setup password. The setup
password is not echoed on screen when it is entered.
You can enable this security feature if you have specified a system password or a
setup password in Security Setup.
In Security Setup, set Setup Lock to Enable.
Restricting access to the docking unit
The docking unit can only be accessed if you enter the docking unit password. The
docking unit password is not echoed on screen when it is entered.
You can enable this security feature if your notebook is attached to a docking unit.
In Security Setup, set Docking Unit Password to Enable and specify the docking unit
password.
Preventing the notebook from booting from floppy disk
The operating system cannot be started from drive A: with a boot disk (system
disk).
If you only want the notebook to boot from its hard disk:
Set Boot Device to Hard Disk in Security Setup.
If the operating system is to be started from the PCMCIA card in PCMCIA slot 1 or
from the hard disk:
Set Boot Device to PCMCIA in Security Setup.
Preventing write operations to floppy disk
Write operations to floppy disks in the notebook are impossible. Floppy disks
cannot be overwritten or deleted.
In Security Setup, set Diskette Write to Disable.
36 A26391-K64-Z100-2-7619