Specifications

Changing display settings Operation
Changing display settings
You configure the basic display settings with Video Setup in the Setup program (see
the section "System configuration").
You can change the settings listed below using key combinations.
Setting the gray scales for the monochrome display
Press the key combination Fn + F10 until you have found the gray-scale
configuration you require.
Switching between normal and reverse video
If your notebook has a monochrome or DSTN color display, you can switch
between normal and reverse video. You can select a normal display (dark
characters on a light background) or a reverse display (light characters on a dark
background).
Press the key combination Fn + F11 .
The setting you select with Reverse Video in Video Setup is always active when you
switch on your notebook.
Switching between internal and external displays
If an external display is connected to your notebook, you can switch between
different display options:
– just the notebook's internal display
– just the external display
– both the internal and the external display (not possible with DSTN color display).
The setting you select with Display Device in Video Setup is always active when you
switch on your notebook.
Press the key combination Fn + F12 until you find the display option you
require.
A26391-K64-Z100-2-7619 33