Specifications

Operation Displays and input devices
+ Fn
Fn
Fn
F3
Standby
Enable Standby mode
This key combination enables Standby mode. Standby appears in
the function display.
You can cancel Standby mode by pressing any key.
+ Fn
Fn
Fn
F4
Suspend
Enable Suspend mode
This key combination enables Suspend mode. When you switch
the notebook on again, it returns to the same place you were in the
program that was running when you switched to Suspend mode.
+ Fn
Fn
Fn
F6
Load
Password
Load the setup password
This key combination loads the setup password from the disk
System Utilities (see "Starting the setup program").
+ Fn
Fn
Fn
F8
Speaker
On/Off
Enable/disable the speaker
This key combination switches the notebook's built-in speaker
on/off.
+ Fn
Fn
Fn
F10
Grey
Scale
Set up gray scales
If your notebook has a monochrome display, this key combination
lets you alter the gray scales it displays.
+ Fn
Fn
Fn
F11
Reverse
Video
Switch between normal and reverse video
If your notebook has a monochrome or DSTN color display, this
key combination switches it between normal and reverse video.
+ Fn
Fn
Fn
F12
LCD/CRT
Select internal/external display
If an external display is connected to your notebook, you can switch
to it with this key combination. You can opt to use:
– just the notebook's internal display
– just the external display
– both the internal and the external display.
Enable/disable the integrated numeric keypad
This key combination enables and disables the integrated numeric
keypad. PadLK appears in the function display when the numeric
keypad is enabled. The editing functions indicated in blue on the
keycaps are enabled.
26 A26391-K64-Z100-2-7619