Specifications

Displays and input devices Operation
If PadLK is visible in the function display, pressing the Pad Num key enables and
disables the numeric functions of the keys in the integrated numeric keypad. The
keys produce numbers (the numbers indicated in blue on the lower right of the
keycaps) when NumLK is visible in the function display.
If PadLK and/or NumLK are visible in the function display, the keys in the integrated
numeric keypad will also produce the standard characters shown on the keys. If
you press and hold the
Fn key, the keys will produce lowercase letters and
numbers.
If you press and hold the key combination
Fn + Shift, the keys will produce
uppercase letters and the characters indicated on the upper left of the keycaps.
Key combinations
The description of key combinations that follows applies to systems running the
MS-DOS operating system. Other key combinations are described in the relevant
manuals supplied with your application programs.
You enter key combinations as follows:
Press and hold the first key in the combination.
While keeping the first key pressed, press the other key or keys in the
combination.
If the external keyboard does not feature an Fn key, you can
i
simultaneously press the Alt and Shift keys instead.
+ Fn
Fn
Fn
ESC
SETUP
Start the Setup program
If the message Press Fn + Esc for Setup appears when you
start your notebook, run the Setup program by pressing the key
combination indicated.
+ Fn
Fn
Fn
F1
LCD Off
Switch the display on/off
This key combination switches your notebook's display on and off.
Doing so does not affect any running programs.
+ Fn
Fn
Fn
F2
Low
Power
Enable/disable Low Power mode
This key combination enables and disables Low Power mode
(slower CPU speed, half-bright display backlight).
A26391-K64-Z100-2-7619 25