Specifications

Preparation for use Connecting the power supply unit
Connecting the power supply unit
Place the notebook on a level, stable surface.
2
3
b
a
1
Plug the DC output connector on the power supply unit into the DC input
connector on the notebook (1).
!
The supplied power cord conforms to the requirements of the country in
which you purchased your notebook. Make sure that the power cable is
approved for use in the country in which you intend to use it.
The notebook and the power supply should be at least 200 mm apart. Keep
the area within 100 mm of the notebook and the power supply unit clear.
Do not cover the ventilation slots in the notebook and the power supply unit.
Connect the AC power cable to the power supply unit (2).
Connect the AC power cable to a grounded wall outlet (3).
The LED on the power supply unit (b) and BATTERY LED on the notebook (a)
light up.
The battery charges. When the notebook is not running, the battery takes roughly
two hours to charge. When the notebook is running, it takes roughly five hours to
charge. You can install the operating system and the application programs while
the battery is charging.
12 A26391-K64-Z100-2-7619