Specifications

Troubleshooting
On-screen error messages
This section describes the error messages displayed by the system BIOS. Error
messages displayed by the operating system or programs are described in the
relevant manuals.
Diskette read failure - press F1 to retry boot
The system disk is defective.
Insert a working system disk.
Press the function key F1 .
Incorrect diskette, insert the utility diskette.
Press ENTER key after ready to backup.
The password cannot be saved to the disk you have inserted.
Insert the disk System Utilities.
Press the Enter key.
No boot device available - press F1 to retry boot
The operating system will not load because the hard disk is not connected is
has failed.
The operating system can be loaded from drive A: or from a PCMCIA card.
Which, depends on whether Boot Device is set to Floppy Drive or PCMCIA in
System Setup.
If the notebook is connected to a docking unit with floppy disk drive, the
operating system cannot be loaded from a PCMCIA card. If you wish to boot
from drive A:, the Diskette Boot setting has to be changed to Internal or
External.
Insert a system disk or a bootable PCMCIA card.
Press the function key F1 .
A26391-K64-Z100-2-7619 95