User's Manual Addendum

45
Using several handsets
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / registration.fm / 07.06.2005
Changing previously set internal
destination number
v ¢ í ¢ Room Monitor
s Jump to the Call to: line.
§Edit§ Press the display key.
§Yes§ Press the display key to con-
firm the prompt.
¤ Enter number as described in "Activat-
ing the room monitor and entering the
number to be called" (page 44).
¤ Save changes (page 12).
Deactivating the room monitor
remotely
Important: The phone must support
touch tone dialling and the room monitor
should be set for an external destination
number.
¤ Take the call from the room monitor
and press keys 9 ;.
The room monitor function will deactivate
after the call ends. There will be no further
room monitor calls. The other room moni-
tor settings on the handset (e.g. no ring-
tone) will however remain activated until
you press the display key
§Off§ on the hand-
set.
To reactivate the room function with the
same phone number:
¤ Turn on the activation again and save
with
§Save§ (page 44).
Setting the Walk and Talk mode
The Walk and Talk function allows two
handsets to communicate with each other
no matter how far they are from the base
station.
Example: You go on holiday and take two
handsets with Walk and Talk functionality
with you. Set the Walk and Talk function
on both handsets.
Important:
One of the following requirements must
be met.
u Both handsets are registered to the
same base station.
u Both handsets are registered to differ-
ent base stations and both are set to
Best Base (page 41).
u One of the handsets is not registered to
any base station and the registered
handset is set to Best Base.
u Neither handset is registered to a base
station.
Please note:
u In Walk and Talk mode, the range
between the handsets is a maximum of
300 m in the open.
u The handsets can no longer be reached
by incoming calls.
u The Walk and Talk mode severely
reduces the handset operating times.
u The Walk and Talk mode is retained
even when you switch your handset off
and back on.
Activating Walk and Talk mode
v ¢ í ¢ Walky-Talky
If, when you are in Walk and Talk mode,
you press the talk key c or handsfree
key d, the call will go to all the hand-
sets that are in Walk and Talk mode. The
connection is made with the first handset
to answer the Walk and Talk call.
u The loudspeaker volume and advisory
tones are set in exactly the same way as
if your handsets were in range of the
base station (page 49).
u "Activate/deactivate ringtone"
(page 50) and "Activate/deactivate key-
pad lock" (page 9) are available in Walk
and Talk mode.
u To open the menu, press the display
key ©.