User's Manual Addendum

39
Using T-Net box
Gigaset S440-445 / IM-engl / A31008-M1635-A661-1-7619 / T-NetBox_SAG.fm / 07.06.2005
Using T-Net box
The T-Net box is the answering machine in
your network provider's network. You can-
not use the T-Net box unless you have
applied to your network provider.
Configuring T-Net box for
fast access
With fast access you can direct dial either
the T-Net box or the integrated answering
machine.
The integrated answering machine is pre-
configured for fast access. However, you
can configure the T-Net box instead. Ask
your network provider about this.
Configuring T-Net box for fast access and
entering the T-Net box number
v ¢ Î ¢ Set Key 1
Network Mailb.
Select and press
§OK§ (‰ =on).
~ Enter T-Net box number.
© Press the display key.
Save Entry Select and press §OK§. The entry
is stored.
a Press and hold (idle status).
This setting is now valid for all registered
handsets.
Calling T-Net box
1 Press and hold. This connects
you directly to T-Net box.
d Press handsfree key d
if required. You hear the
T-Net box announcement.
Viewing a message from
T-Net box
When a message arrives for you, you get a
call from T-Net box. If you have requested
Calling Line Identification, the display
shows the T-Net box number. If you accept
the call, the new messages are played
back. If you do not accept the call, the
T-Net box number will be stored in the list
of missed calls and the message key
flashes (page 19).