User's Manual

COMMUNICATION CERTIFICATION LABORATORY TEST REPORT: 73-6954
FCC ID: L82-242240
Page 110 of 129
Exhibit 8
Note: The display will show a maximum of 16 digits. If more than
16 are used, the digits at the left of the display move off the
screen as additional digits are dialed.
Note: The call timer will activate when you press TALK.
Answering a Call
1. Remove the handset from the base
OR
2. press TALK ..
Ending a Call
1. Place the handset in the base
OR
2. press TALK .
Redialing a Number
To immediately redial the last number dialed,
1. Press TALK .
2. Press REDIAL/PAUSE .
To display and/or edit the last number dialed,
1. Press REDIAL/PAUSE to display the last number dialed.
2. Press DEL/MUTE .to delete any wrong digits.
3. Press TALK .to dial.
Active Call Features
The following features are only available while you are on an
active call.
Changing the Handset’s Earpiece Volume
1. Press the
5
or
6
key to change the handset volume.
2. The earpiece volume is displayed as a digit (1-5)
Turning Mute On and Off
Mute allows you to hear the other caller, but the other caller
cannot hear you. To turn mute on or off,
1. Press MUTE to turn mute on (the display will read “MUTE
JOHN DOE
MUTE ON