Manualshelf

User's Manual

ManualsBrandsSiemens Information and Communication Mobile ManualsElectronicsCordless Telephone Handset
21222324252627282930
number. The name of
the cordless handset or desk
station you are dialing appears as soon as the number starts ringing.
•• Dialing 0 calls the active desk station.
•• Pressing the BASE soft key, also calls the active desk station, but the desk station will not ring. The speakerphone
activates for a two-way conversation. This feature is called Voice Call.
• The dialing number of each cordless handset a the number you assign when registering that handset to a desk station.
Press the * key or the All INT soft key to page every cordless handset and desk station in the system. All phones will
ring, but only one can take the call.
Redial Option
Pressing the REDIAL soft
key allows you to retrieve the last five external
numbers dialed. Use the up arrow and down arrow keys to view the
saved numbers and the TALK key to dial the displayed number.
Moving a Number from the Redial List to the Directory
1. With the display showing the desired Redial entry, press OK.
30 Chaptcr3 •• Making, Answering, and Terminating Calls
2. Highlight "Move to Directory" and press OK.
3. Enter a name, if required, and press OK. See Chapter5 Directory and Call Log for information about entering text.
4. Highlight "Save Entry" and press OK.
Deleting a Redial Number
With the display showing the desired Redial entry, press OK. Highlight the "Delete Number" option and press OK.
Block Dialing
Normally, you access an external line and then dial a number. Block dialing allows you to enter and edit a
telephone number before you get a dial tone.
1. Enter the external telephone number by pressing the keypad keys.
2. You can edit the number by using soft keys.
•• The back arrow key erases characters. The left arrow and right arrow keys help position the flashing cursor. Pressing
the back arrow key deletes the digit to the left of the cursor. To insert a digit, position the cursor to the right of the
desired insert location and enter the digit
•• To insert a pause, press OK. In the "Dial Number" display, highlight the "Insert Pause Option and press OK.
•• You have 30 seconds to finish entering the number and activate a dial tone or the process times out and the number is
lost.
5. Press the TALK key to activate a dial tone and automatically dial the number. Or press OK to access