Instruction Manual

6
Gigaset 4000 Comfort, IM1-eng, A31008-G4000-B002-1-6Z19
4000co.fm
12.04.01
Registering the handset
To make calls with your handset, you must “intro-
duce” it to its base station (registering)
●
if your handset has already been registered at a
dif-
ferent base station
(
steps 1
,
2
and
3
) or
●
if you want to register the handset as a new hand-
set at a
Gigaset base station of an older Gigaset
range
(
steps 1
and
3
).
Step 1:
On the
base station
or on the
base station
telephone
:
Step 2: On the handset
:
A
Press the display key.

H/Set Settings

Select and confirm.

Register H/Set

Select and confirm.

Select the base station.
Step 3: On the handset
:
)

Enter the system PIN and con-
firm (factory setting 0000) – e.g.
is displayed.
Your handset is now ready for operation!
Gigaset On the base station or base telephone
4010/4015
Hold down the key on the underside of the
base station.
3010/3015
Hold down the paging-key
.
on the base
station until you hear
signal tones
.
3020/25
3030/35
4030/35
Select
VHWWLQJV
,
V\VWHPVHWWLQJV
and
UHJLVWHU
KDQGVHW
in the menu at the base station
telephone and confirm with
2.
.
3070/75
4070/75
Press the LED – it will flash during regis-
tration.
Non-Sie-
mens base
stations
To register at “GAP base stations”, follow
the relevant operating instructions
(steps 2 and 3).
Regstr.Procedure Base
Your handset can be registered at up to four base sta-
tions.