Product Manual
Table Of Contents
- Contents
- Using this Guide
- 1 Overview and Intended Use
- 2 Operating the System
- 3 Calibration
- 4 Quality Control
- 5 Maintenance
- 6 Troubleshooting
- 7 File Management
- 8 System Configuration
- Appendix A: Safety Information
- Appendix B: Warranty and Support Information
- Appendix C: Orderable Supplies
- Appendix D: Specifications
- Appendix E: Symbols
- Appendix F: Barcode Reader
- Appendix G: Computer and Printer Interface
- Index
Clinitek Advantus Operator’s Guide 87
System Configuration
3. Select Enter.
External
You can attach and configure an external printer. This printer can be a form or
80-column, continuous-page printer.
Use the
External cycle key to set an external printer.
*If you are using the Clinitek Form Printer, set the Mode Switches on the
printer to Computer (both DS1-1 and DS1-2 switches down).
If necessary, use this procedure to determine which form printer to select.
1. Print a record using each option.
2. Select the 1 that provides the best placement of the printed results on the
form and that works appropriately with your form printer.
Refer to Appendix G, Computer and Printer Interface, for additional
information on the 3 formats.
3. Select
Enter.
Display Contrast
Use this procedure to adjust the contrast of the analyzer display.
1. Select
Display contrast.
2. Use the
+ and - keys to increase or decrease the contrast.
3. Select
Previous Screen to confirm the setting and return to the first Setup
menu.
To Use... Select...
No external printer,
Off
80-column printer,
On, 80 column
Printer Products Form Printer,
80-column printer printing single
record on each page,
On, Form printer 1
Clinitek Form Printer*,
On, Form printer 2
Star Form Printer,
On, Form printer 3