Product Manual
Table Of Contents
- Contents
- Using this Guide
- 1 Overview and Intended Use
- 2 Operating the System
- 3 Calibration
- 4 Quality Control
- 5 Maintenance
- 6 Troubleshooting
- 7 File Management
- 8 System Configuration
- Appendix A: Safety Information
- Appendix B: Warranty and Support Information
- Appendix C: Orderable Supplies
- Appendix D: Specifications
- Appendix E: Symbols
- Appendix F: Barcode Reader
- Appendix G: Computer and Printer Interface
- Index
74 Clinitek Advantus Operator’s Guide
System Configuration
Installing the Analyzer
Record the Warranty Information
1. Locate the serial number.
The serial number is found inside the analyzer near the front left corner.
Figure 23 Locate the Serial Number
2. Print the Pre-service Checklist‚ page 116, and the Warranty Information‚
page 113.
3. Write the installation date and serial number in the spaces provided in the
Pre-service Checklist‚ page 116, and on the Warranty Information‚
page 113.
4. Contact your Siemens Diagnostics representative for your warranty
information if this page is not included in your guide.
1
Serial number