Product Manual
Table Of Contents
- Contents
- Using this Guide
- 1 Overview and Intended Use
- 2 Operating the System
- 3 Calibration
- 4 Quality Control
- 5 Maintenance
- 6 Troubleshooting
- 7 File Management
- 8 System Configuration
- Appendix A: Safety Information
- Appendix B: Warranty and Support Information
- Appendix C: Orderable Supplies
- Appendix D: Specifications
- Appendix E: Symbols
- Appendix F: Barcode Reader
- Appendix G: Computer and Printer Interface
- Index
52 Clinitek Advantus Operator’s Guide
Maintenance
6. Unsnap the connector by lifting up on both sides of the top plate.
The plate raises by about 2 mm (1/16 in).
7. Gently pull the interface cable from the connector.
You may need to wiggle the cable slightly to loosen it.
Figure 19 Remove the Interface Cable