Product Manual
Table Of Contents
- Contents
- Using this Guide
- 1 Overview and Intended Use
- 2 Operating the System
- 3 Calibration
- 4 Quality Control
- 5 Maintenance
- 6 Troubleshooting
- 7 File Management
- 8 System Configuration
- Appendix A: Safety Information
- Appendix B: Warranty and Support Information
- Appendix C: Orderable Supplies
- Appendix D: Specifications
- Appendix E: Symbols
- Appendix F: Barcode Reader
- Appendix G: Computer and Printer Interface
- Index
Clinitek Advantus Operator’s Guide 49
Maintenance
Remove the Paper Roll
1. Remove the paper roll:
a. Lift up the roll.
b. Tear the paper between the roll and the printer.
c. Remove the core and remaining paper on the roll.
2. Remove any paper remaining in the printer:
a. Locate the printer paper release lever.
This lever is colored green and is located on the right of the printer
when looking at the front of the analyzer.
b. Push down on the back of the lever to unlock the roller.
c. Pinch and lift the front of the lever to raise the paper guide.
d. Carefully pull paper through the printer in its normal direction of travel.
Figure 16 Printer Release Lever
1
Printer release lever