Product Manual
Table Of Contents
- Contents
- Using this Guide
- 1 Overview and Intended Use
- 2 Operating the System
- 3 Calibration
- 4 Quality Control
- 5 Maintenance
- 6 Troubleshooting
- 7 File Management
- 8 System Configuration
- Appendix A: Safety Information
- Appendix B: Warranty and Support Information
- Appendix C: Orderable Supplies
- Appendix D: Specifications
- Appendix E: Symbols
- Appendix F: Barcode Reader
- Appendix G: Computer and Printer Interface
- Index
Clinitek Advantus Operator’s Guide 45
Maintenance
Changing the Paper
1. Ensure the analyzer is at the Ready/Run screen.
2. Press the tab on the back of the printer cover.
3. Lift the cover off.
Figure 12 Remove the Printer Cover
4. Remove the paper roll:
a. Lift up the roll.
b. Tear the paper between the roll and the printer.
c. Remove the core and remaining paper on the roll.
WARNING
Be careful when touching the printer. It may be hot.
CAUTION
Do not touch the printer without observing precautions for handling
electrostatic sensitive devices. A risk of electrostatic discharge to
the analyzer exists when touching the printer.